HomeAbout UsProductsNewsTechnology SupportBecome DealerContactUs
 
  Automotive Sensor Simulator And Tester ADD71  
 
 
Contact Us
 

409# No 9 Kexing Road FengTai District, Beijing,China
Tel:(+8610) 63754131
Fax:(+8610) 63754130
Email:Dealer@addtools.net
Skype: addtools
MSN:add_tech@hotmail.com

   
  Automotive Sensor Simulator & Tester ADD71
 
·
Measure the signals of automotive sensors
·
Allow simulation of most sensorand computer management components
·
check basic ECU operation
·
Eliminate unnecessary replacement of non-defective sensors
   
Overview
 
 
Features
Measure the signals of automotive sensors
      · The most complete hand held diagnostic tester for sensors,wiring,connectors
and on-board computers
DC voltage,lambda,frequency and pulse signals can be measured
· Digital display shows actual output of signals
· Measures any voltage AC or DC,resistance or frequency output
Allows Simulation of most Sensor and computer managemeng omponents
  · Simulating temperature sensors,throttle potentiometers,switches,air
    flow meters and lembda/oxygen srnsors
  · Features AC voltage output to simulate vehicle speed sensors(vss),
    CAM,CRANK,and ignition reluctors
  ·  Simulates actual working condition of any sensor without having to remove it
    from the vehicleA.B.S.,Crank,Can,Coolant,Oxygen,MAP,MAF,MAT,VSS,etc
Cheeks basic ECU operation
  ·  Controlling the signals being produced allows you to check ECU response and
    operation.This prevents mis-diagnosis where the fault may lie in the ECU itself
    or in the wiring between the component and the ECU.Works independently or with
    any scan tool ever made
Can be used on any domestic or import vehicle
Eliminates unnecessary replacement of non-defective sensors
Can drive computer into"open or closed loop."
RF Box
 
 
COMBox
 
SPECIFCATIONS
Simulate Signal Range Function
DC Voltage        0-1V Simulating lambda/oxygen sensors
0-5V Simulating DC signal of sensors 
0-12V
Resistance 0-5K Simulating temperature or resistance sensors
0-200K
Frequency SignalV/Duty/Hz 0-5v 10-90% 10-4KHz Simulating frequency signal sensors 
0-12V 10-90% 10-4KHz
   
Test Function Range Basic Accuracy
DC Voltage 400mV,4v ,40v,400v,1000v ±(0.5%+3d)
AC Voltage 400mV,4v ,40v,400v,750v ±(0.8%+3d)
DC Current 40mA,400mA,10A ±(1.2%+3d)
AC Current 40mA,400mA,10A ±(1.5%+3d)
Resistance(Ω) 400,4K,40K,400K,4M,40M ±(1.0%+3d)
Capacitance 40nF,400nF,4μF,40μF,100μF ±(5.0%+3d)
Frequency 10Hz-10MHz ±(0.5%+3d)
Duty cycle 0.1%-99.9% ±(2.0%+3d)
Diode test and Audible Continuity test   Test current:1±0.6mA
  >60Ω Buzzer sounds

 
           
     
 
BMW 20PIN
BENZ 38 PIN
AUDI 4PIN
CITRON 2PIN
FIAT/SUZUKI
DAIHATSU
 
 
   
Copyright © 2005 ADD-TECH CO.,LTD